A Message to Our Customers in Response to COVID-19

Swoosh Online Community

A central location for the users of NX, Teamcenter, Solid Edge, and all things PLM. Because who has time to google anymore?

Prepping for an NX ...
 
Notifications
Clear all

Prepping for an NX 12 Update  

 

Al Kraus
(@akraus)
NX CAM Guy Moderator
Joined: 2 years ago
Posts: 12
Topic starter  
wpf-cross-image

Prepping for an NX 12 Update

Are you considering updating to NX 12.0.0, NX 12.0.1, or a later version update? Siemens has changed (for the better) the way the newest version (12.0.1) is downloaded.

The 12.0.1 version of NX can be a stand alone installation.  There is no need to first install NX 12.0 as was the case with previous updates.  If you have NX 12.0 installed that is OK, this will update it to 12.0.1.

This version has been divided into 3 smaller files and all three must be downloaded and put in the same folder/location.

  • nx-12.0.1.r1.zip
  • nx-12.0.1.r1.z01
  • nx-12.0.1.r1.z02

For our active/existing customers, you can download this through our Customer Portal* or from the Siemens site.

(*Note: You must be registered and approved for Customer Portal login access.)

After downloading, you should have the 3 files in the same folder.

Next, you will want to un-zip the file nx-12.0.1.r1.zip.

Note: This will extract the data for all 3 downloads.  (You should not try to un-zip the .z01 or the .z02 files).

If when using WinZip or 7-Zip you may get an error when un-zipping the file.  "Cannot open file '....nx-12.0.1.r1.zip' as archive" or any other error, you will need to download the latest version of your un-zip program.

In my case, this is the error that I received when trying to unzip the download.

No matter what I tried to change, it would not un-zip.  I needed the newer version of utility.

I was using 7-Zip version 9.  I found that I needed to use 7-zip version 18 or higher to work with the nx download.

I went to www.7-zip.org and download the version for your machine.

With a new version of 7-zip, the NX download extracted without problem and I placed it in the folder with the other downloaded files.

Now I was ready to install NX 12.0.1

Open the dvdrom1201_nx folder.

Use MB3 (right mouse button) on the Launch.exe and choose Run as administrator.  Then follow the prompts.


Quote
Share:
without
https://www.swooshtech.com/wp-content/themes/maple/
https://www.swooshtech.com/
#5a7c96
style1
paged
Loading posts...
/home/swooshte/public_html/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
off
on