From the Swoosh Vault.

SESSION REWIND

Choose from one of the webinars below to watch the full rewind on-demand.

  • All
  • NX CAD
  • NX CAM
  • Solid Edge
  • Teamcenter
  • Uncategorized

Solid Edge 2020 is on its way and it comes with a new licensing process, similar to that of NX. Once you upgrade, you’ll have 30 days to transition over to the new procedure. There are several key steps involved in this process and we’ll walk you through them step-by-step. During the session, Swoosh Application […]

August 8, 2019

0

Lights, camera, Keyshot! Swoosh Application Engineer and Keyshot Kurbrick Dylan Malek introduces the program's key features. In just a few steps, transform your dull geometry into a photo-realistic rendering that will even fool you. Choose the materials that make up your design then add custom lighting that interacts in a scientifically accurate way with your [...]

June 24, 2019

1

Don't use the default! Learn how to create a custom drawing template for your designs. No two companies look alike and neither should your drawing templates. In this 32-minute webinar, Application Engineer Reese Shearer covers how to predefine the look and format of your sheets to be consistent and save time. Then he shows how [...]

June 14, 2019

0

10, 11, 12... 1847? The newest release of NX ditches the yearly updates and starts the beginning of the continuous release methodology. As we help our customers configure the update, we know there's a lot of questions about how these periodic downloads will affect your process. In this 63-minute webinar replay, Application Engineer David Chiu [...]

May 31, 2019

0

CAM Foundation gives your shop floor access the essential manufacturing tools for a fraction of a full-blown NX seat. Whether you have NX CAM or an alternate solution, a license of CAM Foundation lets you view CAM files, review changes, make inspection sheets, and save views for set-up—all the capabilities needed for efficient NC programming. [...]

May 17, 2019

0

Making molds is easy as 1, 2, 3 with a built-in step-by-step process that walks through designing your assembly. Mold Wizard in NX dramatically outperforms traditional CAD by automating much of the process. First, the program validates that your part can be manufactured properly. Then it gets to work designing the mold assembly of your […]

May 3, 2019

0

In this 38-minute webinar, Application Engineer David Chiu covers Design for Manufacturability software in NX which automatically checks for design flaws that are expensive, difficult, or impossible to manufacture so you can avoid expensive and time-consuming rework.

April 26, 2019

0

In this 62-minute webinar, Application Engineer Al Kraus covers advanced machining techniques that save programing time and machine higher-quality products.

March 26, 2019

0

0
0
without
https://www.swooshtech.com/wp-content/themes/maple/
https://www.swooshtech.com/
#5a7c96
style1
paged
Loading posts...
/home/swooshte/public_html/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
off
off