Synchronous Technology lets designers, engineering simulation analysts, and CAM users make dramatic edits directly on the design geometry without having to know downstream processes. This allows for extensive redesigns in just a couple minutes using simple push and pull editing tools. In this 29-minute webinar replay, Application Engineer Reese Shearer answers the question "What the [...]

Create an Isometric Orientation from an Orthographic View One of our users recently called in asking if it was possible to create an Isometric view from an orthographic view on a drawing. This took me on a walk down memory lane because this was something everyone knew in the early days of NX. First, I […]

CAM Foundation gives your shop floor access the essential manufacturing tools for a fraction of a full-blown NX seat. Whether you have NX CAM or an alternate solution, a license of CAM Foundation lets you view CAM files, review changes, make inspection sheets, and save views for set-up—all the capabilities needed for efficient NC programming. [...]
Dealing with disconnected systems can cause more time looking for the right information and less time on value-adding work. One connected and centralized location eliminates manual synchronization and allows for access to a common resource library. Our application engineers will cover how to seamlessly connect these systems to eliminate duplicates, reduce inventory costs, and reduce [...]
NX Mold Wizard: Impressive Commands This 3-part article will discuss a few of the commands within NX Mold Wizard functionality that indicate the level of sophistication of the software product. Part 1 will cover the preliminary step that aids not only the mold maker, but also the designer/engineer. Analyzing Part Mold Flow In this step, [...]

Training improves employee performance. According to Ferdinand Fournies (author of ‘Why Employees Don’t Do What They’re Supposed To Do’) performance problems occur because employees (1) don’t know what they’re supposed to do, (2) don’t know how to do it, and/or (3) don’t know why they should do it.  Training enhances company profits. Based on the […]

0
1
without
https://www.swooshtech.com/wp-content/themes/maple/
https://www.swooshtech.com/
#5a7c96
style1
scrollauto
Loading posts...
/home/swooshte/public_html/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
off
off