Custom shape tools at the time this set of instructions was written is for use with Planar Mill and Planar Profile operations only. The following steps are only a recommendation. Start NX9.0 Create a new file inside NX Select OK Create a Sketch Sketch the Profile of your custom tool Your sketch should look similar [...]

November 14, 2014

sestrada

Blog, Solid Edge

0

Solid Edge Floating License Allocation If your organization has different versions of Solid Edge and utilizes Floating Licenses, you can control to which users get those licenses. For example, your organization could have 2 versions of Solid Edge Premium and 2 versions of Solid Edge Classic. Normally, the licenses are allocated on a first come, [...]
This is a procedure for Cloning an assembly in NX. Start by creating a folder/directory named cloned Open the NX file you wish to clone. From the Assemblies pull down menu. Select Cloning (Make sure assemblies are active, if Assemblies are not active Cloning option is not visible.) Select Create Clone Assembly. This dialog will [...]

Using Existing NX CAM Files as Templates Templates in NX CAM are utilized to save programming time and the possibility of errors. When utilizing templates, the programmed tool, speeds, feeds, non-cutting moves, cutting parameters, and cut patterns should be consistent. Templates can also be utilized to consistently process your machined parts in very similar sequences. […]

Creating a Reuse Library in NX 8.5 NX Reuse Libraries aid in assembly with jigs and fixtures by simply dragging the files into the manufacturing setup files. Sample Reuse Library files can be downloaded from Siemens PLM here; however, a webkey is necessary. Follow these steps to setup a reuse library and create a reuse […]

7
0
without
https://www.swooshtech.com/wp-content/themes/maple/
https://www.swooshtech.com/
#5a7c96
style1
paged
Loading posts...
/home/swooshte/public_html/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
off
off