Custom shape tools at the time this set of instructions was written is for use with Planar Mill and Planar Profile operations only. The following steps are only a recommendation. Start NX9.0 Create a new file inside NX Select OK Create a Sketch Sketch the Profile of your custom tool Your sketch should look similar [...]
This is a procedure for Cloning an assembly in NX. Start by creating a folder/directory named cloned Open the NX file you wish to clone. From the Assemblies pull down menu. Select Cloning (Make sure assemblies are active, if Assemblies are not active Cloning option is not visible.) Select Create Clone Assembly. This dialog will [...]

Using Existing NX CAM Files as Templates Templates in NX CAM are utilized to save programming time and the possibility of errors. When utilizing templates, the programmed tool, speeds, feeds, non-cutting moves, cutting parameters, and cut patterns should be consistent. Templates can also be utilized to consistently process your machined parts in very similar sequences. […]

Creating a Reuse Library in NX 8.5 NX Reuse Libraries aid in assembly with jigs and fixtures by simply dragging the files into the manufacturing setup files. Sample Reuse Library files can be downloaded from Siemens PLM here; however, a webkey is necessary. Follow these steps to setup a reuse library and create a reuse […]

The simplest way to customize NX is through the use of macros A macro records a series of keystrokes in order to automate them into a simple keystroke or an icon on a custom Toolbar. Any series of keystroke a NX operator does repeatedly should be considered for a macro in order to speed up […]

0
0
without
https://www.swooshtech.com/wp-content/themes/maple/
https://www.swooshtech.com/
#5a7c96
style1
paged
Loading posts...
/home/swooshte/public_html/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
off
off